UTIMER_CNTR_CTRL

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as UTIMER_CNTR_CTRL

CNTR_TYPE=Val_0x0, CNTR_DIR=Val_0x0, CNTR_RUNNING=Val_0x0, CNTR_EN=Val_0x0

Channel (n) Counter Control Register

CNTR_EN	Counter Enable: 0 (Val_0x0): Counter is disabled. 1 (Val_0x1): Counter is enabled.
CNTR_RUNNING	Counter Running: Note: Writing this bit have no effect. 0 (Val_0x0): Count operation is stopped 1 (Val_0x1): Count operation is running
CNTR_TYPE	Counter Type: 0 (Val_0x0): Sawtooth 1 (Val_0x1): Sawtooth one shot 4 (Val_0x4): Triangle 6 (Val_0x6): Triangle one shot
CNTR_DIR	Counter Direction: Note: For triangle counter, this will be the direction at a start event Note: If the direction is changed while the counter is running, it will take effect at the next over/underrun. Changes during triangle wave have no effect. 0 (Val_0x0): Up 1 (Val_0x1): Down

() ()